RADtec Design Series 43-Inch 1500W 110V Infrared Electric Heater

RADtec Design Series is an infrared heater with zero light electric heat panels. Experience optimal comfort with the heat it provides without the harsh lights and orange glow of typical heaters. Available in a standard remote-controlled model and a Wi-Fi-ready model.

Designed for both indoors and covered outdoors, you can utilize this heater's function anywhere in your home. Mounting brackets are included. Install it on the wall or ceiling and adjust the brackets up to 90 degrees to direct the heat. This infrared heater packs an efficient heating power of 1500 Watts. Enough to heat a 50 sq. ft. indoor space or a 30 sq. ft. covered outdoor porch.

Cycle through its four power levels and set the timer for up to 8 hours with the included remote or you can opt for the WiFi-ready model and operate the unit through your phone.

Get the RADtec Design Series and experience maximum comfort with the heat it provides without straining your eyes. Select the model with the control option that you like. Shop now and take advantage of our free delivery offer!

Also available in other wattages: 1800W, 2400W, and 3200W.

Note: Outdoor heating is optimized in mild weather. Heat intensity and coverage also varies according to the mounting height.

Need help determining the right heater and setup for your space and heating needs? Give us a call at 1-866-713-4844 or email us at support@patiofever.com and we'll be happy to help!

 Product Manual

 Specs

Specifications:

Recommendations:

The recommended installation height of the E Models is 84”- 108” from the floor. Under no circumstances is the heater to be installed at less than 71” from the floor. In all cases, it should be installed at a height where it cannot be touched in operation. The heated zones detailed are based on the recommended mounting heights.

In exposed areas with air movement/wind, the far-infrared spread may reduce by 1/3. In such areas, or when used in low air temperatures, we would recommend considering a heater from our medium wave Genesis Series or proportionally increasing the number of E Model heaters and mounting at the lowest height.